Fenders

Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Keep the road grime off your clothes, and arrive in style, with a durable fender set made specifically for the Turbo Como. It's all dry roads from here. - Durable fender set that's specifically designed to fit the Turbo Como. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and specific alloy hardware ensure the perfect fit for your Turbo Como. - Front fender supports Plug + Play mounting. - Front Length: 790mm - Rear Length: 1180mm

The new EVO bolt-on fender is designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression (minimum Fork Offset: 44mm). Fender bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your FOX forks. Compatible with older (2017) onwards FOX 34 & 36 forks which have bolt holes in the brace. Also compatible with the fork brands below (separate adapter kits are required): - Rock Shox Zeb - Rock Shox Recon Gold or Silver 35 - DVO Onyx SC, Sapphire, & Diamond - Ohlins RXF 38 (2019+) & DH - Total length: 515mm (Rr extension 330mm, Fr extension 185mm) - More mud clearance - No more crown fouling at full compression - Stiffer, optimum length, not too short, no longer than needed - Designed and made in the UK from recycled PP - 125g

Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

The new Shorty EVO bolt-on fender is designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression (minimum Fork Offset: 44mm). Fender bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers, and hex key to install to your FOX forks. Compatible with older (2017) onwards FOX 34 & 36 forks that have bolt holes in the brace. Also compatible with the fork brands below (separate adapter kits are required): - Rock Shox Zeb - Rock Shox Recon Gold or Silver 35 - DVO Onyx SC, Sapphire, & Diamond - Ohlins RXF 38 (2019+) & DH - Total length: 390mm (Rr extension 255mm, Fr extension 105mm) - More mud clearance - No more crown fouling at full compression - Stiffer, optimum length, not too short, no longer than needed - Designed and made in the UK from recycled PP - 100g

- Made of resistant chromoplastic - Stainless steel bracket and stays - Pre-assembled for fast and easy installation

Topeak's DeFender M1/M2 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

Mudrocker Front Fender for MTB is your perfect trail companion. Provides excellent mud and splash coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" Attaches to fork legs with hook and loop straps. Hook and loop strap fasteners or cable ties can be used to mount the Mudrocker to the fork bridge. If the fork bridge is perforated, the Mudrocker can be securely mounted with the included adapter. Fender can be adapted with scissors if necessary depending on the fork bridge. Perfect companion with the Mudrocker Rear Fender. - Measurements: 490mm - Weight: 112 grams - Compatiblity Notes: Compatible with disc brakes. Not compatible with V-brakes. - Made in Germany

The new EVO fender was designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression. The EVO Ziptie fender attaches directly to the fork with the supplied zip-ties. Compatible with most forks other than models with reverse arch. - Total length: 515mm (Rr extension 330mm, Fr extension 185mm) - More mud clearance - No more crown fouling at full compression - Stiffer, optimum length, not too short, no longer than needed - Designed and made in the UK from recycled PP - Strong enough for DH racing at the highest level - 120g

Genuine replacement parts No one wants that wet stripe on their back. Details: - Get back on the road with a genuine replacement fender set. - Color matched for direct compatibility - Original equipment replacement fender set for Electra Townie Go! 8D bikes

The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible

The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible

The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible

The X-Guard is a universal downtube fender for any wheel size. It is attached using two straps on the lower bar (downtube), making it compatible with fat bikes and bicycles with oversized tires for all-around mud protection. It also protects E-MTB batteries from dirt, splashes and flying rocks. The straps are extra long and can be shortened as needed, making X-Guard suitable for any frame shape and all common battery models.

Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos. To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times. - Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and nitrile O-rings - Length: 490mm - Width: 60mm - Weight: 75g

Accessorize your ride while keeping yourself dry at the same time. - Front and rear full length fenders designed for use on Townie 26" bicycles ONLY - Fits both men's and ladies' 26" Townie models - Protects against splashes - WILL NOT FIT Tall Townie Mens Bicycles or 24" Townie bicycles

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)

Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide. The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier. - Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination) - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and zip-ties - Length: 560mm - Width: 55mm - Weight: 200g

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Note: The Roadrunner AR - Road fender fits 700c wheels up to a width of 28mm Weight: 548 g / 1.21 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays - Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

Topeak's DeFender XC11 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Topeak's DeFender XC11 for 27.5-inch wheel bikes is a rear fender that offers durable rain and mud protection on wet and sloppy rides. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit. It's incredibly light, too.

Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Keep water and mud at bay with SKS's Dashboard fender! It's light and easy to install and remove. Plus, it works with most rigid and suspension forks.

Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.

- Fits tubes from Ø27 to 35mm - Fits 26" to 28" wheels - Two width options: 51mm and 46mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included

- Fits tubes from Ø27 to 35mm - Fits 26" to 29" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included

Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.

Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.