Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail
$33.99 - $39.99
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
$21.00 - $29.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$22.00 - $29.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Deep side skirts protect stanchions and dust seals from rocks and debris
- Spoiler/lower fender - 35mm fits 35 Chromoplastics, Commuter II & Raceblade fenders - Hardware included
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
- Spoiler, 50/55mm fits Chromoplastics, Commuter II - Hardware included.
The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.
Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
Shockboard / Shockblade & Dashboard hardware kit (for 2nd bike)
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler
This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame
- Raceblade Long Hardware Kit, for 2nd bike, or to replace worn parts
Stay clean and dry with SKS's Velo42 Urban fenders! The rear snap-on fender attaches to seat tubes between 25 and 35mm in diameter to give you full coverage from road spray. These fenders fit tires up to 32mm wide.
Say goodbye to flying mud! The SPEEDROCKER Extension clip-on mudguard extension mainly protects riders behind you from dirt and wet conditions. The extension—made of black, impact-resistant plastic—can be easily clipped onto the tried and tested SPEEDROCKER rear mudguard, thus extending it by 170mm. It can be mounted and removed without any tools in just a few seconds. The splashing between the tire and mudguard at the lower end also allows it to better deflect any spraying water and mud. This not only protects the rider's back, but also their cycling companion from any flying dirt. - Weight: 36g - Length rear fender: 170mm
Stay clean and dry with SKS's Velo 47 Trekking fenders! The universal mounting system attaches easily to most framers to give you full coverage from road spray. These fenders fit tires from 37 to 62mm wide.
Following a design update, the HIGHTREK clip-on mudguard set impresses with its sporty look. It can be mounted to seat tube diameters of between 28 and 32mm. The well-thought-out universal fastener and clip enable the mudguard to be mounted and removed quickly without any tools.
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
Keep water and mud at bay with SKS's Dashboard fender! It's light and easy to install and remove. Plus, it works with most rigid and suspension forks.
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.
Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.
This innovative fender provides optimal protection for tapered suspension forks. The Shockboard Vario is easily mounted on the fork crown in seconds with the use of high quality rubber straps. The angle of the rear part of the Shockboard Vario fender can be adapted to the geometry of your wheel. The form is based on the SKS Shockboard and Shockblade and makes full use of the splash guard effect that has been proven for decades. - Mounts to fork crown via high quality rubber straps - The rear portion of the fender can be adjusted to various wheel sizes - Provides a solution for mounting a fender to tapered steerer suspension forks
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible