Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Cables

$6.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$6.99
Improve the performance of your shifting with fresh cable and housing. - Entry-level cable and housing set is great for servicing heritage bikes on a budget - Galvanized cable is corrosion resistant and comes pre-stretched - Includes one 1900mm cable and 1750mm of outer housing
$31.99
Rejuvenate the performance of your drivetrain with this convenient and valuable kit that includes all parts needed for installation. - This convenient and valuable kit is the key to restoring your shifting performance - Compatible with Shimano and SRAM drivetrains - Stainless steel cables are each 2300mm long, for front and rear shifting - Compressionless housing comes pre-lubed is 3200mm long - Kit includes Comp shift ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched - Diameter: 4mm
$110.00
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
$120.00
- Complete shifter and brake cables and housing kit - Low friction, prelubricated casing - Cable Material: Stainless Steel - Cables & Housing: Comp.Campagnolo Ergopower Ultra-Shift
$5.99
- Extra long cable length - Road and MTB brake cable ends - 1.6mm x 1900mm
$2.99 - $162.49
- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm
$6.10
Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm
$6.99 - $49.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$6.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$7.99
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black
$8.10
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm
$8.10 - $11.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$8.99
Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.
$9.49 - $11.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$9.99
- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake
$9.99
- Wire hooks securely hold housing segments together and prevent undue noise and migration - Prevent cable shafting - Secure any loose cable - Easy to use and Quiet - Option for E-Shift & Brake Shift/Dropper & Brake Shift/Dropper & E-Bike Control
$10.99
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.
$10.99
Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings
$11.99
Extend housing runs using these double-ended junction end caps.
$11.99
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
$11.99
- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm
$12.99 - $25.70
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
$12.99 - $18.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
$13.50
Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire
$13.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
$14.90 - $79.99
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.
$14.90
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.
$14.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$16.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.
Page 1 of 4 Next page