Headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC34/28.6/H16/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 50g

Service and replacement parts specifically for Trek Knock Block technology. Genuine replacement parts Get your bike back on the trail with the headset parts you need. - Trek proprietary headset components compatible with Trek Knock Block models - 72-degree headset fits 2021 Slash 29 - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset. - For 1 1/8-inch fork/headset - Stack height: 8mm - 53 grams

Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/30/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 88g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. - Technical Description: ZS49/30/H4/x - Bottom Type: ZS - ZeroStack - Bottom Head Tube Inside Dia.: 49.61mm - Crown Race Seat Dia.: 30.015mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 4mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 aluminum - Weight: 50.91g

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and a nylon top cover - Hammer: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 12.8mm/11.9mm - Color: Black - Weight: 149g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements.

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

110 Series ZS62 Bottom headset from Cane Creek.

This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset. - For 1.5-inch crown race diameter - Stack height: 4mm - 54 grams

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover - Mallet: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm - Color: Black - Weight: 150g

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 20 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 1 Degree Adjustment - Long version is designed for headtube lengths between 115 - 140 mm

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Interlok spacer compatible - 110 year warranty

This is the Bottom External Cup for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race - Impact: 45x45 degree Campagnolo Integrated - S.H.I.S.: IS42/28.6|IS42/30 - Stack: 8mm/1mm - Color: Black, Orange, Red - Weight: 68g

- 1-1/8" / 1-1/4", 45°/ 45° ACB - Compatible with carbon or alloy head tubes - For tapered 47mm / 52mm OD head tube - For 1-1/8" to 1-1/4" tapered fork - Alloy top cover - Upper : 1-1/8" angular contact bearing black seal) - Lower : 1-1/4" angular contact bearing (black seal) - Stack height 15.6+1=16.6mm - 74 grams

Hellbender 70 Slam headset.

Hellbender 70 Slam Top Assembly headset.