The SuperSix EVO is a road bike that represents the best possible blend of aerodynamics and low weight. Its advanced frame design features highly truncated airfoil tube shapes that offer the same weight, and equal or better stiffness, than round tubes, but reduce drag by up to 30%.
The SuperSix EVO lineup has always been known for its elegantly smooth ride quality, and Cannondale's latest iteration is even smoother. The new SAVE rear stays, integrated binder, and 27 KNØT seat post increase compliance by 18%—a massive benefit that riders will certainly appreciate, especially on longer days. Cannondale's proprietary high-strength, high-stiffness carbon construction features an advanced matrix of intermediate modulus fibers that together create a frame that's light, durable, and lively. For additional comfort and capability on all kinds of roads, the SuperSix EVO will easily fit the largest tire size the brake caliper will allow (28mm for most brakes).
Offering further aerodynamic improvements, the disc version has a unique design that routes the brake lines through an opening in the front of the headtube for minimal drag and headache-free serviceability. Considering every detail, the bike makes use of Speed Release dropouts that combine the benefits of added thru-axle stiffness and the convenience of a QR. The lightest disc brake road frameset Cannondale's ever made, the SuperSix EVO has a racy geometry and stiffness for explosive speed.
- HollowGram Si Carbon Disc wheelset
- Shimano Ultegra wide-range drivetrain
- Upgraded Cannondale 2 bar/stem
|BallisTec Carbon, integrated cable routing w/ Switchplate, SAVE, PF30a, flat mount disc, integrated seat binder
|BallisTec Carbon, SAVE, 1-1/8" to 1-1/4" steerer, integrated crown race, flat mount disc, internal routing, 55mm offset (47-54cm) 45mm offset (56-62cm)
|SuperSix, 1-1/4" lower bearing, 25mm top cap
Front: 12 x 100mm Speed Release
Rear: 12 x 142mm Speed Release
|HollowGram Si, Carbon Clincher Disc, 19mm inner, 35mm deep, tubeless ready
|Cannondale HollowGram Sealed Bearing, straight pull
|Formula Grand Forza
|Vittoria Rubino Pro Bright Black, 700 x 25c
|Cannondale 1, BB30a, FSA rings
|Cannondale Alloy PressFit30
|Shimano HG601, 11-speed
|Shimano Ultegra, braze-on
|Shimano Ultegra GS
|Shimano 105, 11-32, 11-speed
|Shimano Ultegra hydro disc, 2x11
|Cannondale 2, 7050 Alloy, Compact
|Cannondale Grip Bar Tape w/Gel, 3.5mm
|Cannondale 2, 6061 Alloy, 31.8, 7°
|Shimano Ultegra hydro disc, 160/160mm RT54 rotors
|Prologo Kappa Dea RS
|HollowGram 27 KNØT, Alloy, 2 bolt clamp, 330mm
|Accessories & Extras
|Cannondale Wheel Sensor
* Subject to change without notice.