Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Accessories/Parts

Saris Bike Beam
$78.00
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Yakima 1 1/4-Inch Hitch Adapter
$59.99
Yakima's 1 1/4-Inch Hitch Adapter makes a 2-inch hitch bike carrier compatible with 1 1/4-inch hitch receivers.
Yakima 1-7/8-inch Trailer Coupler
$69.99
Coupler for 1-7/8 " balls for RACKandROLL trailer.
Yakima 2-inch Trailer Coupler
$49.99
Coupler for 2" balls for Yakima RACKandROLL trailer. TECHNICAL SPECS - Weight: 4.12 lbs - Dimensions: L 11.00” x W 3.90” x H 5.00”
Yakima 8 Hole Chainstraps
$11.99
Chainstraps for a multitude of rear of car bike racks.
Yakima ArmLock Cable Lock
$49.99
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
Yakima BaseClip
$74.99
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima BaseClip 195
$74.99
Tailor your towers - these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car's naked roof.
Yakima BaseClip 196
$74.99
Tailor your towers - these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car's naked roof.
Yakima CoreBar EndCaps
$9.99
Pair of EndCaps for Yakima CoreBar.
Yakima DoubleHaul
$1,099.99
Like the perfect cast, the deluxe DoubleHaul rooftop fly rod carrier gets you to that special spot on the water at dawn or that early evening hatch. You're there and ready with the perfect set-up- up to 4 fully strung-up rods up to 10 ft. long. Rain or shine, your rods are securely locked and protected from the elements. The reel box is designed to protect and fit most reel sizes, with space to carry up to 2 spey rods. To make things even easier, the DoubleHaul mounts to most roof racks with a simple, tool-free universal crossbar attachment. With modern styling and an optional half-length configuration, it's a perfect fit on any size vehicle. Be ready to hit the water when the fish are biting. Product Details: - Customizable rooftop fly rod carrier, configurable at either 11 ft. or 6 ft. of length. - Transports 4 fully strung-up fly rods up to 10 ft. long. - The top 2 reel slots fit most 12-wt. reels and the bottom 2 reel slots fit most 10-wt. reels. - Reel box holds common fighting butts of single-handed rods. - Reel box holds up to 2 spey rods in upper slots. - Four individual plastic-lined aluminum rod tubes provide strength and separation for rods while helping prevent abrasion. - Side placement of reels reduces wear on rod-stripping guides and eyelets. - Custom-fitted felt padding for premium reel protection. - Universal mounting hardware fits all Yakima crossbars and most other roof racks. - Add the SmarT-Slot Kit 3 to attach to a T-slot crossbar for an even sleeker profile (sold separately). - Included Yakima SKS (Single Key System) locks secure rods inside DoubleHaul and lock DoubleHaul to roof rack. Product Specs: - Weight: 46.60 lbs - Dimensions: L 131.00in x W 14.00in x H 9.00in
Yakima EasyTop
$164.99
Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear – from skis and snowboards to boats and surfboards. It installs in minutes – just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle. - Straps on top of almost any vehicle to create an instant roof rack - Carries us to 80 lbs of gear - Great for boats, boards, skis, ladders, and other long, flat loads - Thick structural padding protects your roof and your gear - Secures easily through door frames with integrated straps - Double-latching buckle adds security - Includes two Heavy Duty Straps and tie-down rope
Yakima EndCaps for 86-inch Load Bars
$19.99
Yakima Load Bar End Caps. - For 86" load bars only
Yakima Fat Bike QR Locking Skewer
$64.99
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima Fat Straps
$24.99
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
Yakima Felt Pads (Sweetroll/ Hullhound)
$29.99
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Yakima Fork Adapter
$74.99
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Yakima FreshTrack 4 Ski and Snowboard Mount
$259.99
NEW! Perfect for family weekends or ditching work on a powder day, FreshTrack 4 is made for loading up and finding first tracks. Wide enough for a couple of boards or four pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for fresh powder and blue groomers. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries four pairs of skis up to 120mm wide at the tip or two snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 7.94 lbs - Dimensions: L 25.25" x W 5.75" x H 7.25" Installation Details - Some assembly required - Tool-Free Install - 25 minute install
Yakima FrontLoader Tensioning Handle
$9.99
Tensioning handle for FrontLoader universal bike mount. Includes one handle.
Yakima Frontloader Tensioning Knob
$19.99
Replacement red tensioning knob for Frontloader
Yakima HD Bar
$379.99
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups
Yakima High Lift Jack Holder
$174.99
Be prepared with this heavy-duty bracket that keeps a high-lift jack accessible, and which conveniently mounts near the LockNLoad platform's perimeter. Easily installs in minutes and suitable for all common jacks. Add your own padlock to the integrated lock loop for greater security. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details - Securely carries 1 high-lift jack with a 50 mm steel standard bar up to 35 lbs. - Heavy-duty stamped steel construction, with a durable black-zinc coating. - Fits the LockNLoad platform rack and most other brands of T-slot equipped platforms. - Installs in minutes with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Add your own padlock to the integrated lock loop for greater security. - Limited Lifetime Warranty. Product Specs - Weight: 6.50 lbs - Dimensions: L 7.00in x W 3.00in x H 8.00in
Yakima Holdup Wheelstrap
$5.99
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima Hood Anchor
$34.99
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in
Yakima JetStream EndCaps
$9.99
Pair of EndCaps for Yakima JetStream bars.
Yakima K323 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima K328 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima K450 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima Light Mounting Bracket
$99.99
- Heavy-duty steel brackets that accommodate lights of virtually any size or shape. - Sold in set of 2
Yakima LightenUp Light Bracket Kit
$99.99
LightenUp your path-and easily secure your light bar or a pair of spotlights on your LockNLoad platform rack and Yakima T-slot crossbars. Configurable in 16 different orientations, this bracket provides peace of mind when you head out on nighttime adventures. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Configurable in 16 different arm-mounting orientations. - Supports up to an 18-lb. light bar or a pair of 9-lb. spotlights. - Max light bar length 52" long, max light bar depth 5.25" (including heat sink). - Heavy-duty steel construction, with a durable black-zinc coating. - Fits LockNLoad platform rack and perimeter rails, Yakima JetStream, FlushBar, RailBar, HD Bar T-slots, and most other T-slot equipped platforms and crossbars. - Also accommodates light bars that don't secure from the ends. - Holds lights with 6/8/10 mm hardware, using included torx head hardware for enhanced security. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 1.00 lbs - Dimensions: L 7.25in x W 2.00in x H 2.00in - Some assembly required, 30 minute install
Page 1 of 4 Next page