Bottom Brackets

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen-infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. - PF30 for 30mm Spindles - Lifetime Guarantee

Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with 30mm crankset spindles. - XD-15 Ceramic-Hybrid cartridge bearings pressed directly into the BB shell, that feature - Deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls, increased contact area and improved performance and longevity. Vendor Part # BKC-7021

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For T47 threaded bottom bracket shell, and a Sram crankset with a 29mm spindle Made in the USA Vendor Part # BKC-0771

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For T47 Internal threaded bottom bracket shell, and a crankset with a 24mm spindle Made in the USA Vendor Part # BKC-0791

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For T47 Internal threaded bottom bracket shell, and a BB386 crankset with a 30mm spindle Made in the USA Vendor Part # BKC-0796

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For T47A threaded bottom bracket shell, and a crankset with a 24mm spindle. The bearing is seated externally on the bottom bracket. Made in the USA Vendor Part # BKC-0750

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For T47A threaded bottom bracket shell, and a crankset with a SRAM DUB 29mm spindle. The bearing is seated externally on the bottom bracket. Made in the USA Vendor Part # BKC-0751

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For BB386 bottom bracket shell, for use with wide (104mm+ length) 30mm spindle cranksets. Requires Torqtite wrench for installation. Made in the USA Vendor part # BKC-0891

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For BB386 bottom bracket shell, for use with 29mm Sram DUB crankset. Requires Torqtite wrench for installation. Made in the USA Vendor part # BKC-0899

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For PF30A bottom bracket shell, for use with 24mm crankset. Requires Torqtite wrench for installation. Made in the USA Vendor part # BKC-0889

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For 73mm bottom bracket shell, use with 24mm crank spindle (ex. Shimano MTB) Made in the USA Vendor Part # BKC-0802

Why We Make It We build bearings, so we build bottom brackets. The humble threaded bottom bracket is often the first part installed on a new frame, and the last one the rider thinks about during the life of the bike, but the bottom bracket has a direct effect on pedaling efficiency (read: speed). This is where you put your power into the bike. Having the absolute best interface between your effort and your bike’s forward momentum makes your ride better. The Threadfit™ 24 is how we make bikes that take 24mm cranks the best they can be. Why You Want It ThreadFit™ 24 fits 24mm cranks in BSA bottom bracket shells. Our ThreadFit™ 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create the most precise interface between your frame’s bottom bracket shell and your cranks, it makes your cranks spin lightly and easily, without interference, for the lifetime of your bike (with a little regular service). King’s legendary, angular-contact bearings, both steel and ceramic, are the best in the industry, and actually get faster over time, as their contact surfaces wear. You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket. Our Threadfit™ 24 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kits that allow our ThreadFit™ 24 to be used with a wide selection of road and mountain bike cranks. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Available in 8 beautifully anodized colors - A Fit Kit is required for use - Ceramic bearing upgrade available

Why We Make It We build bearings, so we build bottom brackets. The humble threaded bottom bracket is often the first part installed on a new frame, and the last one the rider thinks about during the life of the bike, but the bottom bracket has a direct effect on pedaling efficiency (read: speed). This is where you put your power into the bike. Having the absolute best interface between your effort and your bike’s forward momentum makes your ride better. The Threadfit™ 24 is how we make bikes that take 24mm cranks the best they can be. Why You Want It ThreadFit™ 24 fits 24mm cranks in BSA bottom bracket shells. Our ThreadFit™ 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create the most precise interface between your frame’s bottom bracket shell and your cranks, it makes your cranks spin lightly and easily, without interference, for the lifetime of your bike (with a little regular service). King’s legendary, angular-contact bearings, both steel and ceramic, are the best in the industry, and actually get faster over time, as their contact surfaces wear. You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket. Our Threadfit™ 24 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kits that allow our ThreadFit™ 24 to be used with a wide selection of road and mountain bike cranks. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Available in 8 beautifully anodized colors - A Fit Kit is required for use and included in the purchase prices - Ceramic bearing upgrade available

Why We Make It We build bearings, so we build bottom brackets. The humble threaded bottom bracket is often the first part installed on a new frame, and the last one the rider thinks about during the life of the bike, but the bottom bracket has a direct effect on pedaling efficiency (read: speed). This is where you put your power into the bike. Having the absolute best interface between your effort and your bike’s forward momentum makes your ride better. The Threadfit™ 30 is how we make bikes that take 30mm cranks the best they can be. Why You Want It ThreadFit™ 30 fits 30mm and DUB spindle cranks in BSA bottom bracket shells. Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from. You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket. Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks. The Fit Kit for our ThreadFit™ 30 with 30mm spindle cranks is available here. The Fit Kit for DUB cranks is available here. ThreadFit 30 comes with a Center Sleeve for 73mm BB shell. For 68mm shell - sleeve PBB082 is required(included in Fit Kit #2 for DUB Road cranks). - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Available in 8 beautifully anodized colors - A Fit Kit is required for use - Ceramic bearing upgrade available - Uses Chris King bottom bracket cup tool for installation

Why We Make It We build bearings, so we build bottom brackets. T47 is a standard we helped develop, an answer to the imprecise and often loud press fit bottom brackets that appeared on the market a few years ago. T47 offers the benefits of larger bottom bracket shells, mainly frame stiffness, with the upsides of traditional, threaded bottom brackets, precision and quietness. Why You Want It ThreadFit T47 30i will fit 68mm, 73mm, 83mm, 86mm, and 92mm shell widths with 30mm spindles. All our bottom brackets come with King's legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear. You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don't want to think an awful lot about your bottom bracket. - Steel Bearings - King Lifetime Warranty - Legendary made-in-house bearings - Ceramic bearing upgrade available - Threaded security with PressFit 30 shell stiffness - A Fit Kit is required for use and included in the purchase price - Engineered, manufactured and assembled in Portland, Oregon USA - Uses Chris King bottom bracket cup tool for installation

Why We Make It We build bearings, so we build bottom brackets. T47 is a standard we helped develop, an answer to the imprecise and often loud press fit bottom brackets that appeared on the market a few years ago. T47 offers the benefits of larger bottom bracket shells, mainly frame stiffness, with the upsides of traditional, threaded bottom brackets, precision and quietness. Why You Want It ThreadFit T47 30x fits 68mm and 73mm shell widths with 30mm spindles. This bottom bracket comes packed with King's legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear. You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don't want to think an awful lot about your bottom bracket. - Steel Bearings - King Lifetime Warranty - Legendary made-in-house bearings - Ceramic bearing upgrade available - Threaded security with PressFit 30 shell stiffness - A Fit Kit is required for use - Engineered, manufactured and assembled in Portland, Oregon USA - Uses Chris King bottom bracket cup tool for installation

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Ceramic Hybrid - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 122g

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ZERØ Ceramic Hybrid - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 102g

The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro Ceramic Hybrid - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 153g

- Ceramic bottom bracket for DUB spindle cranks

- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB30 - BB Shell Width: 68/73mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 42mm

- Ceramic bottom bracket for DUB spindle cranks

Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB30 - BB Shell Width: 73mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 42mm

The game-changing DUB family goes ceramic. While DUB has been simplifying the game, eliminating compatibility frustration and confusion for years, the DUB ceramic bottom bracket gives riders an additional option for even more silky-smooth performance. This is a whole other level in bottom bracket friction reduction, thanks to its high efficiency, ceramic bearings. What's more, the DUB ceramic bottom bracket can help riders save precious rotational energy without sacrificing the kind of robust seals required for real MTB and road racing scenarios. - High-efficiency ceramic bearings save riders rotational energy - Silky smooth, without sacrificing robust seals required for real-life durability MTB and racing scenarios - One oversized spindle to work across every bottom bracket standard - PF30 BB386 (Road: 86.5mm) Specifications: - Spindle Interface Type: SRAM DUB - Bottom Bracket Shell I.D.: 46 - BB Shell Width (mm): 86 - Defined Color: Black - BB/Frame Interface: 386 EVO - Weight: 150

The SRAM DUB™ bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB™ spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket specification. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.

The SRAM DUB™ bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB™ spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket specification. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket specification. - Easy installation - Outboard and inboard cup options to support your bike's spec. - Sealed cartridge bearings available in both stainless and ceramic versions SPECIFICATIONS: - BB-FRAME INTERFACE: T47 (85.5), T47 (Road and Road Wide) 68mm, T47 (Road and Road Wide) 77mm, T47 (Road Wide: 85.5mm), T47 (Road: 85.5mm) - CHAINLINE: n/a - SPINDLE LENGTH: n/a - SUPPORT E-TYPE FD: n/a - CRANK-BB INTERFACE: DUB - BEARING TYPE: Ceramic, Standard - SPINDLE DIAMETER: DUB - CUP MATERIAL: Aluminum, n/a

- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: PF30 - BB Shell Width: 68/73mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 46mm

The game-changing DUB family goes ceramic. While DUB has been simplifying the game, eliminating compatibility frustration and confusion for years, the DUB ceramic bottom bracket gives riders an additional option for even more silky-smooth performance. This is a whole other level in bottom bracket friction reduction, thanks to its high efficiency, ceramic bearings. What's more, the DUB ceramic bottom bracket can help riders save precious rotational energy without sacrificing the kind of robust seals required for real MTB and road racing scenarios - High-efficiency ceramic bearings save riders rotational energy - Silky smooth, without sacrificing robust seals required for real-life durability MTB and racing scenarios - One oversized spindle to work across every bottom bracket standard - PressFit 30 (68-73mm) Road Wide Specifications: - Spindle Interface Type: SRAM DUB - Bottom Bracket Shell I.D.: 46 - BB Shell Width (mm): 68 - Defined Color: Black - BB/Frame Interface: PF30 - Weight: 120

- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB92 - BB Shell Width: 89/92mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 41mm

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. - Enduro XD-15 ceramic ball bearings are made from pure silicon nitride material with extreme high density and uniform compaction - The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode - Dual stage anodize black and gold machined aluminum bottom bracket cups - Kluber NBU52 grease runs better and smoother with time and is highly resistant to being washed out - Designed for use with 30mm spindles